Cautions When Printing with Multi-purpose Tray

Be sure to use the multi-purpose tray supplied with this printer.

Do not mount the multi-purpose tray while the printer is in operation.

Do not remove the multi-purpose tray while the printer is in operation. Doing so may damage the printer, the multi-purpose tray, or the media.

Do not get dirt on the multi-purpose tray or scratches on the reflectors. The printer may not be able to recognize that a media is loaded, or printing may become misaligned. If the multi-purpose tray becomes dirty, wipe the reflector clean with a soft and dry cloth, taking care not to scratch it.

After printing, allow the printing surface of the media to dry naturally. Do not use hairdryers or expose the media to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.

Remove any dirt from the multi-purpose tray before placing printable discs on it. Loading discs on a dirty multi-purpose tray may scratch the recording surface of the discs.

Do not print onto printable discs that are not compatible with inkjet printing. The ink will not dry and may cause problems with the disc itself or DVD players or other devices it is loaded into.

Do not print onto a printable disc's recording surface. Doing so will make data recorded onto discs unreadable.

Hold printable discs by their edges. Do not touch either the label surface (printing surface) or recording surface.

The multi-purpose tray may become dirty if software other than Easy-PhotoPrint Editor is used.

For precautions on Printable Nail Stickers, refer to the instructions supplied with the Printable Nail Stickers.

The multi-purpose tray may become dirty if an application other than Nail Stickers Creator is used.